Support Portal

Please select a category on the left or use the search.

Search

Part number

Series

Order code

Description Version
Festo Robotic & FTL Extension for Visual Studio Code

The Visual Studio (VS) Code extension adds script language support for FTL (Festo Teach Language) to VS Code. It allows FTL programming of (robotic) applications that are controlled by Festo PLCs on CODESYS basis. The extension communicates via TCP/IP with the Festo PLC which has to be enabled by the user.
1.9.21
10/06/2025 		Function elementsFile and language versions
Function blocks Lenze SM-Drive function blocks for Lenze PLC Desinger

SoftMotion (SM-Drive) library for servo drives with EtherCAT (CiA402) in the PLC Desinger development environment from Lenze.

Supported systems:

  • servo drive CMMT-AS-C12-11A-P3-EC-S1 (8133355)
  • servo drive CMMT-AS-C2-11A-P3-EC-S1 (5340821)
  • servo drive CMMT-AS-C2-3A-EC-S1 (5340819)
  • servo drive CMMT-AS-C3-11A-P3-EC-S1 (5340822)
  • servo drive CMMT-AS-C4-3A-EC-S1 (5340820)
  • servo drive CMMT-AS-C5-11A-P3-EC-S1 (5340823)
  • servo drive CMMT-AS-C7-11A-P3-EC-S1 (8133354)
  • servo drive CMMT-ST-C8-1C-EC-S0 (8084005)
3.23.32.0
28/02/2023 		Function elementsFile and language versions
Function blocks Rockwell Parameterisation and control Motion Terminal VTEM

Library valid as of FW version 4.26.x

Library for Rockwell controllers

Created with Rockwell RSLogix 5000 v16.05.00

Supported systems:

  • Motion Terminal VTEM (8047502)
V31.3.05
12/11/2024 		Function elementsFile and language versions
Target Support Package CODESYS
Target Support Package for the Motion Controller CMXR-C2. It is for configuration, commissioning and programming of the controller with the software CoDeSys provided by Festo.

Supported systems:
  • Controller CMXR-C2 (567869) Revision 06
1.0 Target support packageFile and language versions
Target Support Package CODESYS
Target Support Package for the Motion Controller CMXR-C2. It is for configuration, commissioning and programming of the controller with the software CoDeSys provided by Festo.

Supported systems:
  • Controller CMXR-C2 (567869) Revision 06
1.11 Target support packageFile and language versions
Target Support Package CODESYS

CDPX Package for CODESYS V3

Supported systems:

  • Operator unit CDPX-X-A-S-10 (574412)
  • Operator unit CDPX-X-A-W-13 (574413)
  • Operator unit CDPX-X-A-W-4 (574410)
  • Operator unit CDPX-X-A-W-7 (574411)
  • Operator unit CDPX-X-B-W-10 (8155215)
  • Operator unit CDPX-X-B-W-4 (8155213)
  • Operator unit CDPX-X-B-W-7 (8155214)
  • Operator unit CDPX-X-E1-W-10 (8155217)
  • Operator unit CDPX-X-E1-W-15 (8155218)
  • Operator unit CDPX-X-E1-W-7 (8155216)
  • Operator unit CDPX-X-E2-W-10-EX2 (8155221)
  • Operator unit CDPX-X-E2-W-15-EX2 (8155222)
  • Operator unit CDPX-X-E2-W-21-EX2 (8155223)
  • Operator unit CDPX-X-E2-W-5-EX2 (8155219)
  • Operator unit CDPX-X-E2-W-7-EX2 (8155220)
3.5.16.46
19/12/2024 		Target support packageFile and language versions
Target Support Package CODESYS
Supported systems:
  • automation system CPX-E /-EX1E (5237644)
  • controller CPX-E-CEC-C1-PN (4252741)
  • controller CPX-E-CEC-M1-PN (4252743)
3.5.10.153
22/08/2017 		Target support packageFile and language versions
Target Support Package CODESYS

Supported systems:

  • automation system CPX-E /-EX1E (5237644)
  • controller CPX-E-CEC-C1 (5226780)
  • controller CPX-E-CEC-C1-EP (4252742)
  • controller CPX-E-CEC-C1-PN (4252741)
  • controller CPX-E-CEC-M1 (5266781)
  • controller CPX-E-CEC-M1-EP (4252744)
  • controller CPX-E-CEC-M1-PN (4252743)
3.5.18.36
19/10/2023 		Target support packageFile and language versions
Designer Studio

Festo Designer Studio for CDPX-HMI

Supported systems:

  • Operator unit CDPX-X-A-S-10 (574412)
  • Operator unit CDPX-X-A-W-13 (574413)
  • Operator unit CDPX-X-A-W-4 (574410)
  • Operator unit CDPX-X-A-W-7 (574411)
  • Operator unit CDPX-X-B-W-10 (8155215)
  • Operator unit CDPX-X-B-W-4 (8155213)
  • Operator unit CDPX-X-B-W-7 (8155214)
  • Operator unit CDPX-X-E1-W-10 (8155217)
  • Operator unit CDPX-X-E1-W-15 (8155218)
  • Operator unit CDPX-X-E1-W-7 (8155216)
  • Operator unit CDPX-X-E2-W-10-EX2 (8155221)
  • Operator unit CDPX-X-E2-W-15-EX2 (8155222)
  • Operator unit CDPX-X-E2-W-21-EX2 (8155223)
  • Operator unit CDPX-X-E2-W-5-EX2 (8155219)
  • Operator unit CDPX-X-E2-W-7-EX2 (8155220)
4.5.2
19/12/2024 		ProgrammingFile and language versions
Camera Configuration Studio
Machine Vision Engineering-Software for setting up, adjusting, displaying and recording inspection jobs of the camera system SBRD-Q

Supported systems:
  • controller SBRD-Q (8067301)
1.1.19323.0
10/12/2019 		ConfigurationFile and language versions
CheckKon
Operations taking place within the Checkbox can be displayed, documented and adapted with the help of CheckKon.

Supported systems:
  • Camera system CHB-C-N (3501040)
  • Checkbox CHB (197890)
  • Checkbox CHB-C-C (532271)
  • Checkbox CHB-C-P (532270)
  • Checkbox CHB-C-X (536084)
  • Compact Vision System SBOC-Q-R1B (541399)
  • Compact Vision System SBOC-Q-R1B-S1 (569771)
  • Compact Vision System SBOC-Q-R1C (548317)
  • Compact Vision System SBOC-Q-R1C-S1 (569774)
  • Compact Vision System SBOC-Q-R2B-S1 (569772)
  • Compact Vision System SBOC-Q-R2C (551022)
  • Compact Vision System SBOC-Q-R3B-WB (555841)
  • Compact Vision System SBOC-Q-R3B-WB-S1 (569777)
  • Compact Vision System SBOC-Q-R3C-WB (555842)
  • Compact Vision System SBOC-Q-R3C-WB-S1 (569778)
  • Compact Vision System SBOI-Q-R1B (541396)
  • Compact Vision System SBOI-Q-R1B-S1 (569773)
  • Compact Vision System SBOI-Q-R1C (548316)
  • Compact Vision System SBOI-Q-R1C-S1 (569776)
  • Compact Vision System SBOI-Q-R3B-WB (555839)
  • Compact Vision System SBOI-Q-R3B-WB-S1 (569779)
  • Compact Vision System SBOI-Q-R3C-WB (555840)
  • Compact Vision System SBOI-Q-R3C-WB-S1 (569780)
  • Control unit CB-ST (192888)
  • Control unit IB-ST (192887)
  • Control unit SB-ST (192889)
4.3 Rel. 06
19/08/2016 		ConfigurationFile and language versions
CheckOpti
Software for configuration and optimisation of the inspection programs of the Compact Vision Systems SBO..-Q und the Checkbox.

Supported systems:
  • Camera system CHB-C-N (3501040)
  • Checkbox CHB (197890)
  • Checkbox CHB-C-C (532271)
  • Checkbox CHB-C-P (532270)
  • Checkbox CHB-C-X (536084)
  • Compact Vision System SBOC-Q-R1B (541399)
  • Compact Vision System SBOC-Q-R1B-S1 (569771)
  • Compact Vision System SBOC-Q-R1C (548317)
  • Compact Vision System SBOC-Q-R1C-S1 (569774)
  • Compact Vision System SBOC-Q-R2B-S1 (569772)
  • Compact Vision System SBOC-Q-R2C (551022)
  • Compact Vision System SBOC-Q-R3B-WB (555841)
  • Compact Vision System SBOC-Q-R3B-WB-S1 (569777)
  • Compact Vision System SBOC-Q-R3C-WB (555842)
  • Compact Vision System SBOC-Q-R3C-WB-S1 (569778)
  • Compact Vision System SBOI-Q-R1B (541396)
  • Compact Vision System SBOI-Q-R1B-S1 (569773)
  • Compact Vision System SBOI-Q-R1C (548316)
  • Compact Vision System SBOI-Q-R1C-S1 (569776)
  • Compact Vision System SBOI-Q-R3B-WB (555839)
  • Compact Vision System SBOI-Q-R3B-WB-S1 (569779)
  • Compact Vision System SBOI-Q-R3C-WB (555840)
  • Compact Vision System SBOI-Q-R3C-WB-S1 (569780)
  • Control unit CB-ST (192888)
  • Control unit IB-ST (192887)
  • Control unit SB-ST (192889)
3.2 Rel. 06
19/08/2016 		ConfigurationFile and language versions
Function blocks CODESYS
Supported systems:
  • controller CECC-D (574415)
  • dashboard GASD-E2M-12M (8098793)
  • dashboard GASD-E2M-1M (8098791)
  • dashboard GASD-E2M-6M (8098792)
  • dashboard GASD-E2M-L1-1M (8098790)
37
19/03/2019 		ConfigurationFile and language versions
PROFINET/ETHERNET IP FDT/DTM

Device Type Manager (DTM) for Festo CPX Terminal, MPA-FB-VI, MPA-F-FB-VI or VTSA-FB-VI with PROFINET (CPX-FB33, CPX-M-FB34, CPX-M-FB35) or ETHERNET IP (CPX-FB36). Allows connection to field devices via HART with CPX-4AE-4AA-H module.

Supported systems:

  • Bus node CPX-FB43 (8110369)
  • Bus node CPX-(M)-FB44 (8110370)
  • Bus node CPX-(M)-FB45 (8110371)
  • PLC CPX-CEC-C1-V3 (3473128)
  • PLC CPX-CEC-S1-V3 (3472425)
  • PLC CPX-CEC-M1-V3 (3472765)
  • Bus node CPX-FB33 (548755)
  • Bus node CPX-FB36 (1912451)
  • Bus node CPX-M-FB34 (548751)
  • Bus node CPX-M-FB35 (548749)
  • CP-electrical part CTEC (539641)
  • Input module CPX-4AE-4AA-H (8059847)
  • Terminal CPX (197330)
  • Terminal CPX-P (562818)
  • Valve terminal MPA-FB-VI (530411)
  • Valve terminal MPAF-FB-VI (544397)
  • Valve terminal VTSA-FB (539217)
  • Valve terminal VTSA-FB-NPT (539218)
  • Valve terminal VTSA-F-FB (547965)
  • Valve terminal VTSA-F-FB-NPT (547966)
V1.0.3
12/03/2018 		ConfigurationFile and language versions
Vision Sensor Configuration Studio Konfigurations-Software für Vision Sensoren SBSA/SBSC/SBSI/SBSX
  • Description: Konfigurations-Software für Vision Sensoren SBSA/SBSC/SBSI/SBSX mit Funktionen zum Ändern der Firmware, Einstellen der Netzwerkeigenschaften, Einrichten der Vision Sensoren, Erstellen der Prüfprogramme und zum Berechnen der optischen Verhältnisse. Die Software besteht aus den Modulen "Vision Sensor Device Manager", "Vision Sensor Configuration Studio" und "Vision Sensor Visualisation Studio" sowie dem Optik-Berechnungstool „SBS Calculator.
V2.4.4.4. build 15
10/05/2023 		ConfigurationFile and language versions
URCap Software DHEF

Supported systems:

  • adaptive shape gripper kit for robots DHEF-20-A-RA1 (8119114)
1.1.1
29/06/2020 		DriverFile and language versions
URCap Software EHPS

Supported systems:

  • parallel gripper kit for robots EHPS-16-A-RA1 (8119111)
  • parallel gripper kit for robots EHPS-20-A-RA1 (8119112)
  • parallel gripper kit for robots EHPS-25-A-RA1 (8119113)
1.1.3
29/06/2020 		DriverFile and language versions
USB driver
Installer for Festo CPX USB Driver Version 6.6.1 WHQL certified by Microsoft. USB driver for Festo CPX-USB-Adapter (NEFC-M12G5-0.3-U1G5) with hardware version >= HW 10.09. only. Supported OS: Windows XP/2003/Vista/Windows 7 (32/64 Bit).

Supported systems:
  • Adapter NEFC-M12G5-0.3-U1G5 (547432)
  • Terminal CPX (197330)
6.7.3
19/05/2016 		DriverFile and language versions
Conversion of technical and physical units

Conversion of units:

- length

- area

- volume

- pressure

- flow rate

- temperature

- measure

- speed

- density
Calculation:

- Flow rate (Air)

- force by pressure and area (e.g. for cylinder force)
Engineering softwareFile and language versions
DE/AT Festo digital Product Catalogue Germany / Austria Systematically faster access to Products & Services - with the new digital catalogue for Windows™.

Festo products and services provide impulses for greater productivity in

industrial automation. Define your optimal solution from over 33,000 products in thousands of variants, with only a few mouse-clicks.
2022-2023 Engineering softwareFile and language versions
EPLAN and QuickSearch Quick and easy access to EPLAN data

This AddOn adds these 3 entries to the CAD menu of QuickSearchPlus:

- EPLAN Data Portal

- EPLAN DXF Download

- EPLAN Shopping Cart

 

This gives you quick and easy access to EPLAN data for all Festo products. Especially the possibility to transfer a product or a complete project list to the EPLAN cart with one click is a big time saver!
2019.07
01/07/2019 		Engineering softwareFile and language versions
Festo AirDryer: Dryer calculation for membrane and adsorption dryers <b>Version 1.0.2.0</b> (2007-12-10)

This program calculates the correct size of Festo dryers by showing possible solutions for individual apllications. Afterwards direct links are making it comfortable to find its way to the to the online catalogue.

Also measurement units like Celsius vs. Fahrenheit can be easily changed to the particular needs.
Furthermore the tool gives a short overview about the different drying principles and leads with direct links to the online catalogue.
Version 1.0.2.0
10/12/2007 		Engineering softwareFile and language versions
Festo CAD plugin for AutoDesk AutoCAD Assure a reliable link between the Festo PARTdataManager and your AutoCAD.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

For the current version of Festo PARTdataManager no separate download of the CAD plugin is necessary. The CAD plugin can be selected during the installation.

 

PARTdataManager version: supported CAD system versions:

 

05/2023: Autodesk AutoCAD 2018 - 2023 

2022: Autodesk AutoCAD 2014 - 2022

2021: Autodesk AutoCAD 2014 - 2021

2020: Autodesk AutoCAD 2014 - 2020

2019: Autodesk AutoCAD 2014 - 2019

2018: Autodesk AutoCAD 2014 - 2018

 

Please note: Festo PARTdataManager has to be installed.
2020 (V11 SP8)
01/01/2020 		Engineering softwareFile and language versions
Festo CAD plugin for Autodesk Inventor Assure a reliable link between the Festo PARTdataManager and your Inventor.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

For the current version of Festo PARTdataManager no separate download of the CAD plugin is necessary. The CAD plugin can be selected during the installation.

 

PARTdataManager version: supported CAD system versions:

 

05/2023: Autodesk Inventor 2019 - 2023

2022: Autodesk Inventor 2014 - 2022

2021: Autodesk Inventor 2014 - 2021

2020: Autodesk Inventor 2014 - 2020

2019: Autodesk Inventor 2014 - 2019

2018: Autodesk Inventor 2014 - 2018

 

Please note: Festo PARTdataManager has to be installed.
2022 (V11 SP12)
01/01/2022 		Engineering softwareFile and language versions
Festo CAD plugin for NX Assure a reliable link between the Festo PARTdataManager and your NX.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling including matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

For the current version of Festo PARTdataManager no separate download of the CAD plugin is necessary. The CAD plugin can be selected during the installation.

 

PARTdataManager version: supported CAD system versions

05/2023: NX 12.0 and 1847 - 2212

2022: NX 8.5 - 12.0 and 1847 - 1980

2021: NX 8.0 - 12.0 and 1847, 1872, 1899

2020: NX 8.0 - 12.0 and 1847, 1872

2019: NX 8.0 - 12.0

2018: NX 8.0 - 11.0

2017: NX 7.5 - 11.0

 

Please note: Festo PARTdataManager has to be installed.
2021 (V11 SP10)
01/01/2021 		Engineering softwareFile and language versions
Festo CAD plugin for Solid Edge Assure a reliable link between the Festo PARTdataManager and your Solid Edge.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

For the current version of Festo PARTdataManager no separate download of the CAD plugin is necessary. The CAD plugin can be selected during the installation.

 

PARTdataManager version: supported CAD system versions:

05/2023: Solid Edge 2019 – 2023

2022:      Solid Edge ST6 – ST10 und 2019 – 2021

2021:      Solid Edge ST6 – ST10 und 2019 – 2021

2020:      Solid Edge ST6 - ST9 und 2019 - 2020

2019:      Solid Edge ST6 - ST9 und 2019

2018:      Solid Edge ST7 - ST9

 

Please note: Festo PARTdataManager has to be installed.
2021 (V11 SP10)
01/01/2021 		Engineering softwareFile and language versions
Festo CAD plugin for SolidWorks 2012-2023 Assure a reliable link between the Festo PARTdataManager and your SolidWorks.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

For the current version of Festo PARTdataManager no separate download of the CAD plugin is necessary. The CAD plugin can be selected during the installation.

 

PARTdataManager version: supported CAD system versions:

05/2023: SolidWorks 2019 - 2023

2022.1:   SolidWorks 2014 - 2022

2022:      SolidWorks 2014 - 2021

2021:      SolidWorks 2014 - 2021 

2020:      SolidWorks 2014 - 2019 and 2020

2019:      SolidWorks 2014 - 2018

2018:      SolidWorks 2012 - 2017

 

For the respective PARTdataManager version 2020 the CAD interface for SolidWorks 2020 is available as a separate setup.

 

Please note: Festo PARTdataManager has to be installed.
2022.1 (SWX 2014 - 2022)
02/04/2022 		Engineering softwareFile and language versions
Festo CAD plug-in Update for SolidWorks 2020 with PARTdataManager 2020 Assure a reliable link between the Festo PARTdataManager and your SolidWorks.

Update for PARTdataManager 2020 for SolidWorks 2020.

 

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.
 
Advantages:
• Much faster component modelling with matings
• No additinal application is needed
• Use of your own system templates
• Individualised configuration of interface settings

 

Please note: Festo PARTdataManager 2020 has to be installed.

 

For the PARTdataManager version 2020 the CAD interfaces for the corresponding SolidWorks versions 2014-2019 are available in a separate setup that can be downloaded here in the Support Portal:
 
2020-1: SoldWorks 2014-2019
2020 (V11.00 swx 2020)
01/01/2020 		Engineering softwareFile and language versions
Festo CAD-Plugin for Pro/Engineer and Creo Parametric Assure a reliable link between the Festo PARTdataManager and your CAD system.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.


Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

For the current version of Festo PARTdataManager no separate download of the CAD plugin is necessary. The CAD plugin can be selected during the installation.

 

PARTdataManger version: supported CAD system versions:

 

05/2023: 

    • Creo Parametric 5 - 9

 

2022: 

    • Creo Parametric 1 - 8

 

2021: 

    • Creo Parametric 1 - 7

    • Pro/Engineer WF5

 

2020:

    • Creo Parametric 1 - 6

    • Pro/Engineer WF5

 

2019:

    • Creo Parametric 1 - 5

    • Pro/Engineer WF5

 

2018:

    • Creo Parametric 1 - 4

    • Pro/Engineer WF5 

 

Please note: Festo PARTdataManager has to be installed.
2022 (V11 SP12)
01/01/2022 		Engineering softwareFile and language versions
Festo PARTdataManager CAD Reduced workload - thanks to 2D/3D CAD data for more than 33,000 products

Festo PARTdataManager can be installed as a separate application.

Take advantage of comprehensive full-text searches, e.g. for part numbers, product lines or designation as well as functions like geometrical product comparison and geometrical search based on an imported 3D file.

 

2D/3D CAD interfaces for:

• AutoCAD

• Autodesk Inventor™

• CATIA V5

• Pro/ENGINEER

• NX™

• SOLID EDGE

• SolidWorks
2024/04 (V12.07.03 Build 232651)
18/04/2024 		Engineering softwareFile and language versions
Show 10 more results ...