129 → www.festo.com/didactic Pneumatics Training Packages > Components > Tubing, Distribution Pneumatics Tubing, Distribution 1 Start-up valve with filter control valve, 5 µm Filter control valve with pressure gauge, start-up valve, push-in fittings, and quick coupling plug, mounted on a swivel mount. The filter with water separator removes dirt, pipe sinter, rust, and condensed water. The pressure regulator maintains the compressed air supply at the set operating pressure and compensates for pressure fluctuations. The filter bowl has a condensate drain screw. The start-up valve pressurizes and exhausts the connected pressure zone. The start-up valve is operated using the rotary knob. – Design: Sintered filter with water separator, piston control valve – Primary pressure: Maximum 1600 kPa (16 bar) – Working pressure: Maximum 1200 kPa (12 bar) – Grade of filtration: 5 µm – Condensate volume: 43 cm3 – Connection: G1/8” and for plastic tubing with O.D. 6 mm Order no. 526337 2 Start-up valve with filter control valve Filter control valve with pressure gauge and start-up valve mounted on a swivel support. The start-up valve pressurizes and exhausts the connected pressure zone. – Design: Sintered filter with water separator, piston control valve – Standard nominal flow rate: 110 l/ min – Pressure regulation range: 50 – 700 kPa (0.5 – 7 bar) – Grade of filtration: 5 µm – Connection: G1/8” and for plastic tubing with O.D. 6 mm Order no. 540691 3 Start-up valve with filter control valve, lockable Filter control valve with pressure gauge and start-up valve mounted on a swivel support. The start-up valve pressurizes and exhausts the connected pressure zone. The lockable start-up valve reliably prevents unauthorized activation. – Design: lockable start-up valve, filter regulator with pressure gauge, start-up valve – Standard nominal flow rate: 750 l/ min – Operating pressure: 100 – 1000 kPa (1 – 10 bar) – Grade of filtration: 40 µm – Connection: G1/8” and for plastic tubing with O.D. 6 mm Order no. 4795290 4 Plastic tubing Particularly flexible and pressure-resistant 4 x 0.75 silver 10 m 151496 3 x 0.5 silver 5 m 197118 6 x 1 silver 5 m 152963 Minimum order quantity/packaging unit: 50 m 4 x 0.75 silver 152584 4 x 0.75 blue 159662 4 x 0.75 black 159663 4 x 0.75 red 178410 4 x 0.75 yellow 178417 4 x 0.75 green 178424 5 Air reservoir The air reservoir with detenting system can be mounted on a profile plate. The accumulator is equipped with pneumatic push-in fittings at both ends. Functions: – Generating static pressures using a one-way flow control valve – Generating long delay times using delay and flow control valves – Compensating for pressure fluctuations – Use as an accumulator if the pressure suddenly drops – Generating a controlled system with a first-order delay (PT1) – Operating medium: filtered, lubricated, or unlubricated compressed air – Operating pressure: 0 – 1600 kPa (0 – 16 bar) – Connection: Connection: on both sides for plastic tubing with O.D. 4 mm – Quick-action mounting system Quick-Fix 5 Air reservoir, 0.4 l – Volume: 400 ml Order no. 152912 Air reservoir, 0.1 l – Volume: 100 ml Order no. 573281 6 Manifold Manifold with eight self-setting non-return valves. Thanks to a combined connection (for plastic tubing with O.D. 6 mm), the compressed air can be supplied to the control unit via eight individual connections (for plastic tubing with O.D. 4 mm). Order no. 152896 2 3 1 5 6 4
RkJQdWJsaXNoZXIy MzE0OTAwNw==