For tailored advice and product selection/configuration assistance, please contact a sales representative. 34 Process Control Learning Systems Industrial Pressure, Flow, and Level Add-On (HART) LV Series 6090-5 This package is an add-on to the Pressure, Flow, and Level Process Control Learning System. The level transmitter allows students to continuously monitor the level in the column while the pitot tube and the differential-pressure transmitter measure the flow rate with accuracy. A pneumatic control valve completes this add-on and allows students to exert control over different processes. The two transmitters use a 4 – 20 mA signal as their output. This allows the use of either a programmable logic controller or a PID controller on the training system. This package requires a reliable source of compressed air from either a central air supply or a portable unit which can deliver air at a minimal flow rate of 28 L/ min (1 SCFM) with a pressure of 207 kPa (30 PSI). en 120 – 240 V, 50/60 Hz 588680 Note: This system cannot be sold or delivered in countries that require CE compliance. Shown with optional components Optional equipment: Pneumatic control valve (with digital positioner, HART) – DVC 2000 588357 Pneumatic control valve (with positioner, Fisher 3660) 588358 Electric control valve 588360 Pneumatic control valve (with digital positioner, HART) – DVC 6200 588363 Optional measurement equipment: Electromagnetic flow transmitter (HART, transmitter on the right) 582413 Vortex flow transmitter (HART) 588320 Coriolis flow transmitter (HART) 588323 Pressure transmitter (HART) 588333 HART software configurator 588420 Optional controller*: ControlLogix PLC bundle – educational 588519 MicroLogix PLC bundle – educational 588521 CompactLogix PLC bundle – educational 588522 ControlLogix PLC bundle – commercial 588513 CompactLogix PLC bundle – commercial 588515 S7-1500 PLC bundle HART – educational 589669 S7-1500 PLC bundle – Educational 589670 Touch-screen computer mount 589678 Touch screen graphic terminal – 14.5 cm (5.7 in) 8165911 Touch screen graphic terminal (Allen-Bradley) – 26.4 cm (10.4 in) 8103425 Industrial PC HMI (Siemens) 589672 Touch-Screen Computer for SCADA 588440 Unmanaged switch (Allen-Bradley) 765575 Unmanaged switch (Siemens) 780054 * Optional dual-sided instrumentation workstation (order no. 589003) required. Other requirements might apply: Please check with your sales representative for details. Note: When you order a PLC bundle, make sure you also order an appropriate HMI or touch-screen terminal. Optional software: FactoryTalk View ME Studio → page 173 Step 7 professional and WinCC Advanced* → page 173 RSLogix 5000* → page 172 * A single license is usually included with the PLC bundles. If you require additional licenses, order these supplementary licenses separately. Introduction and Fundamentals > Process Control Learning Systems > Variants
RkJQdWJsaXNoZXIy MzE0OTAwNw==