→ festo.com/didactic 35 1 Table Designed to support a workstation and its equipment, and provides enough space for additional small items such as a laptop computer. Order no. 587645 2 Work Surface Stainless steel universal drip-tray hinged to a perforated, tiltable work surface on which components can be mounted. It can be placed on top of a regular table or on an optional bench. Size: 80 x 900 x 700 mm Order no. 587925 3 Expanding Work Surface Perforated plate that can be mounted on the Work Surface to increase the work area. Large (30 x 590 x 590 mm) 763446 Small (30 x 290 x 590 mm) 582356 4 Storage/Work Surface Perforated metal plate (30 x 590 x 590 mm) on which the equipment is placed. Two work surfaces can be joined using spacers. Order no. 582357 Bench Mobile workstation on which the large or small work surfaces can be mounted. It has three pairs of side supports over which three storage/ work surfaces can be slid, providing shelving for component storage. 5 Assembled, Without Dressing Panels and Front Doors Order no. 587928 6 Assembled, With Dressing Panels and Lockable Front Doors Order no. 587929 Unassembled Without Dressing Panels and Doors Order no. 587933 7 Dressing Panels (with Lockable Front Door) Designed to fully enclose the bench. Front and side doors are lockable to secure components. Order no. 587927 8 Dual-Sided Instrumentation Workstation Designed to house devices such as controllers, PLCs, color paperless recorders, and touch screen graphic Terminals. The workstation allows two student groups to work simultaneously. It features two mounting pipes to install instruments. Order no. 589003 9 Touch-Screen Computer Mount Allows the installation of a touchscreen computer on the side of either the Dual-Sided Instrumentation Workstation. Order no. 587644 Controller Support Panel Allows the installation of a PLC or PID controller to the side of the mobile workstation. Order no. 687932 10 Storage Station Designed to store the accessories and the various optional models which are not required for the particular process taking place on the workstation. It includes space to store up to four flange tops, many flow meters and control valves on six galvanized struts (three on each side), a few devices on two instrumentation mounting pipes, and miscellaneous pieces of equipment in the three painted stainless-steel storage boxes at the bottom of the station. Order no. 588301 11 Controller Support Panel Metal support plate required to install the controller on the side of a bench. Order no. 587932 Process Control Learning Systems Components 1 2 3 4 5 6 8 9 10 11 7 Note: Some of these components may not be sold or delivered in countries that require CE compliance; please check with a sales representative for details. Introduction and Fundamentals > Process Control Learning Systems > Components
RkJQdWJsaXNoZXIy MzE0OTAwNw==