Hit enter to search or ESC to close

MS series

Learn more about MS series
Pressure regulators MS-LR

Pressure regulators MS-LR

Size 4, 6, 9, 12

Connection G1/8, G1/4, G3/8, G1/2, G3/4, G1, G1 1/4, G1 1/2, G2, also available with NPT thread

Pressure 0.3 ... 4 bar, 0.3 ... 7 bar, 0.5 ... 12 bar, 0.5 ... 16 bar

Flow rate 1000 ... 22000 l/min

Pressure gauge with bar, psi, MPa

Flow direction

- From left to right

- From right to left

Angled outlet block for manifold assembly.

Pressure regulators for manifold assemblies MS-LRB

Pressure regulators for manifold assemblies MS-LRB

Sizes 4, 6

Connection G1/4, G1/2

Pressure 0.3 ... 4 bar, 0.3 ... 7 bar, 0.5 ... 12 bar, 0.5 ... 16 bar

Flow rate 300 ... 7300 l/min

Manifold assembly with through air supply

For configuring a regulator manifold with independent pressure regulation ranges.

Precision pressure regulators MS-LRP

Precision pressure regulators MS-LRP

Size 6

Connection G1/4, G3/8, G1/2, G3/4, also available with NPT thread

Pressure 0.05 ... 0.7 bar, 0.05 ... 2.5 bar, 0.3 ... 4 bar, 0.5 ... 12 bar

Flow rate 800 ... 5000 l/min

Flow direction

- From left to right

- From right to left

Angled outlet block for manifold assembly.

Precision pressure regulators for manifold assembly MS-LRPB

Precision pressure regulators for manifold assembly MS-LRPB

Size 6

Connection G1/4, G3/8, G1/2, G3/4, also available with NPT thread

Pressure 0.05 ... 0.7 bar, 0.05 ... 2.5 bar, 0.3 ... 4 bar, 0.5 ... 12 bar

Flow rate 800 ... 5000 l/min

Flow direction

- From left to right

- From right to left

Angled outlet block for manifold assembly.

Electrical pressure regulators MS-LRE

Electrical pressure regulators MS-LRE

Size 6

Connection G1/4, G3/8, G1/2, also available with NPT thread

Pressure 0.3 ... 4 bar, 0.3 ... 7 bar, 0.5 ... 12 bar, 0.5 ... 16 bar

Flow rate 2200 ... 7500 l/min

Flow direction

- From left to right

- From right to left.

Selection Guide

Selection Guide

Series MS

Pressure regulators MS-LR

The pressure regulator MS-LR keeps the working pressure largely constant, independent of pressure fluctuations in the network and air consumption.
The regulator can be selected in four pressure regulation ranges up to 16 bar control pressure. There are two pressure gauge connections to choose from, depending on the flow direction. As an alternative, it can also be configured with integrated pressure sensor with IP40 and IP65 or with connection thread for external sensors and pressure gauges. The rotary knob is lockable and can be protected against manipulation with a protective cap and a padlock. The alternative is the integrated E11 pressure gauge lock with key. The MS-LR is also suitable for front panel installation, we recommend selecting a rotary knob pressure gauge.

Pressure regulators for manifold installation MS-LRB

The MS-LRB pressure regulator is suitable for manifold installation with supply air fed through to set up a controller battery for supplying and regulating pressure in independent system areas. The pressure outlet can be selected at the front or rear. As an alternative, it can also be configured with integrated pressure sensor with IP40 and IP65 or with connection thread for external sensors and pressure gauges. A rotary knob manometer is optionally available.

Precision pressure regulators MS-LRP

The MS-LRP precision pressure regulator is suitable for sensitive applications with a required pressure hysteresis of 0.02 bar. It ensures a high flow rate performance with low pressure drop and low hysteresis. Depending on the configuration, the output pressure can be set either manually via a rotary knob or via a pneumatic pressure signal.
The regulator can be selected in four pressure regulation ranges up to 12 bar control pressure.

Precision pressure regulators for manifold installation MS-LRPB

The precision pressure regulator MS-LRPB is the blockable option of the precision pressure regulator. It is ideally suited for setting up a manifold for high-precision supply and pressure control in independent system areas and for sensitive applications with a required pressure hysteresis of 0.02 bar. The regulator can be selected in four pressure regulation ranges up to 12 bar control pressure.

Electrical pressure regulators MS-LRE

The MS-LRE electric pressure regulator uses an electrical input signal to control the incoming compressed air according to the set output pressure. The output pressure is indirectly set via an integrated electric drive unit.
The drive unit can be controlled either via the digital inputs on the M12 connector or via the optionally available operator unit.
The constant outlet pressure is ensured by the fail-safe function even in the event of a power failure.