Suction cups with connections are used in industry to lift and transport objects of all kinds in automation technology - especially in vacuum systems. They form the interface between the machine and the workpiece. So that a workpiece can be gripped securely, suction cups with connections should be selected to match the material properties of the respective workpiece. Some suction cups with connections are particularly suitable for use at high temperatures, while others are highly resistant to heavy contamination.
Basically, industrial suction cups with connections are available in either round or oval shapes with or without bellows. Round suction cups with connections are particularly well suited for handling flat workpieces. Suction cups with connections with an oval shape, on the other hand, are used more when handling narrow and elongated workpieces. Festo suction cups with connections are available in numerous different diameters and thus offer the right solution for transporting workpieces with a wide variety of weights, surfaces and shapes.
This suction cup with connector from the VAS(B) series comes in 11 different diameters and is therefore suitable for transporting workpieces with a wide variety of weights, surfaces and shapes. It is available either round or as a bellows variant in nitrile rubber, PUR or silicone. The material nitrile rubber can be used almost universally, while the outstanding qualities of PUR are its long service life and gentle handling thanks to rather soft material. Silicone, on the other hand, has very good temperature resistance and is food-safe.
The suction cup with connector ESS consists of a suction cup and a support plate with mounting. It is suitable for a suction volume of 0.002... 245 cm³ and has a workpiece radius of 10... 680 mm. The suction cup without connector ESV is a wearing part of the suction cup with connector ESS that can be replaced extremely easily. It is used for suction volumes of 0.318... 245 cm³ with a workpiece radius of 10... 680 mm. Suction cup with connector ESS, suction cup without connector ESV
Thanks to a special anti-slip structure, the robust suction cup with connector OGVM is the first choice for dynamic handling of workpieces with complex contours. OGVM has a high level of energy efficiency: The highest lateral forces, minimal suction times and optimum suction ergonomics ensure maximum process reliability. It is available in a round or oval shape, in each case flat, in a bell shape or as a bellows variant.
Our ESG series is a modular product system consisting of a suction cup holder and suction cup with connector with over 5,000 variants of different material properties, suction cup shapes, temperature ranges and holders. This means that the round and oval suction grippers ESG are optionally available with angle and height compensation and filters. Choose the right product for you from a total of 15 suction cup diameters and 6 suction cup shapes. The suction cup volume ranges from 0.002... 245 cm³ with a workpiece radius of 10... 680 mm.
The Bernoulli gripper OGGB is ideally suited for transporting thin, brittle and extremely delicate workpieces. It is characterized by gentle workpiece handling and minimized workpiece contact. OGGB is our solution for minimal contact gripping and for gripping pliable, porous and brittle workpieces.
Festo suction cups with connections and suction grippers offer outstanding functionality and quality. We offer you a comprehensive range of different suction cups with connections in terms of shape, material and size, as well as a large selection of brackets, angle and height compensators and vacuum filters within our modular product system. There are numerous possible combinations that can be used in a wide variety of applications.